Trusted Plumbing Services Nationwide • Licensed & Insured Plumbers Across the USA
Seasonal

Spring Plumbing Maintenance Checklist

Updated on November 14, 2026
Quick Answer:

Spring plumbing maintenance means inspecting for winter damage, testing outdoor faucets for freeze cracks, restarting the irrigation system, checking toilets and faucets for leaks, flushing the water heater, and testing the sump pump before spring rains. Work through the checklist once a year — most items take only a few minutes.

Inspect for Winter Damage

Start with a full walk-through of your home. Check under every sink for drips, stains, or warped wood. Look at ceilings and walls for water stains that may have appeared over winter. Inspect exposed pipes in the basement, crawl space, and attic for cracks, corrosion, or signs of freezing. Check the water heater for leaks around the base and the pressure relief valve. If you find a stain or a musty smell you cannot explain, investigate now — small winter leaks become big spring repair bills.

Test Outdoor Faucets and Hose Bibs

Outdoor faucets are the most common winter casualty. Turn the water supply to each hose bib back on from the inside shutoff valve, then open the outdoor faucet and check the flow. If water trickles or the faucet sputters, the pipe may have frozen and cracked over winter. Also check inside the house near the faucet — a burst pipe inside the wall will show up as a wet spot or dripping in the basement or crawl space. Run each faucet for a minute and confirm steady pressure before reconnecting garden hoses.

Restart the Irrigation System

If you shut down your sprinkler system for winter, spring is restart time. Open the main irrigation valve slowly — a sudden rush of water can damage pipes and sprinkler heads. Run each zone and walk the yard, checking for broken heads, misaligned spray patterns, and wet spots that suggest an underground leak. Clean or replace clogged sprinkler nozzles, check the backflow preventer for leaks or damage, and reset the controller schedule for spring watering. If the system was professionally winterized, consider a professional spring startup ($75–$150) that includes a pressure check.

Check Toilets, Faucets, and Drains

Test every toilet with the food coloring test: add a few drops to the tank, wait 15 minutes, and check whether color appears in the bowl — a leaking flapper wastes 200+ gallons a day. Check each faucet for drips and make sure handles turn smoothly. Run water in rarely used drains (guest bathrooms, floor drains, basement sinks) to refill the P-traps — the water seal evaporates over winter and lets sewer gas into the home. Clean drain strainers and check that all drains flow freely.

Service the Water Heater

Spring is a good time for annual water heater maintenance. Flush the tank to remove sediment that built up over the winter heating season — sediment reduces efficiency and shortens the heater's life. Check the temperature setting (120°F is recommended), inspect the anode rod if your heater is over 3–4 years old, and test the temperature-pressure relief valve by lifting its lever briefly — water should flow out and stop when you release it. If the valve drips afterward or will not open, it needs replacing.

Inspect the Sump Pump and Yard Drainage

Spring rains put your sump pump to the test. Pour a bucket of water into the sump pit and confirm the pump starts, discharges water outside, and shuts off. Check the discharge pipe for blockages or freezing damage, and make sure it directs water away from your foundation. Clean gutters and downspouts of winter debris so rainwater flows away from the house instead of pooling around the foundation. Check that yard grading still slopes away from the house — winter freeze-thaw cycles can shift soil.

Check Appliance Hoses and Connections

Inspect the water supply hoses to your washing machine, dishwasher, and refrigerator ice maker. Look for cracks, bulges, rust, or dampness at the connections. Rubber washing machine hoses should be replaced every 3–5 years — braided stainless steel hoses last longer and are far less likely to burst. A burst washing machine hose can release hundreds of gallons per hour, so this quick check is one of the highest-value items on the list.

When to Call a Plumber

Call a licensed plumber if you find a burst or cracked pipe, if an outdoor faucet has no pressure after winter, if the sump pump fails its test, if the water heater relief valve is faulty, or if you find a leak you cannot trace. Spring is also a good time to schedule a professional whole-home plumbing inspection — catching problems in spring is far cheaper than dealing with emergencies later in the year.

Frequently Asked Questions

What plumbing maintenance should I do in spring?

Inspect for winter damage, test outdoor faucets, restart the irrigation system, check toilets and faucets for leaks, flush the water heater, and test the sump pump before spring rains.

How do I know if an outdoor faucet froze over winter?

Turn the water on and check the flow — a trickle or sputtering suggests a cracked pipe. Also check inside the house near the faucet for wet spots or dripping.

How often should I flush my water heater?

Once a year. Annual flushing removes sediment, improves efficiency, and extends the heater's life.

When should I replace washing machine hoses?

Rubber hoses every 3–5 years. Upgrade to braided stainless steel hoses for longer life and much lower burst risk.

Editorial Note: This guide is for informational purposes only. Plumbing systems can be dangerous. Always consult a licensed professional for any plumbing repairs or installations.