water lines
Sump Pump Installation, Repair & Battery Backup
A sump pump is the last line of defense between your home and a flooded basement or crawl space. It sits in a sump pit at the lowest point of your home, collects groundwater, and pumps it safely away from your foundation. When it fails — usually during the heaviest storm of the year — water can rise fast, damaging flooring, walls, appliances, and stored belongings.
A sump pump system has a few key parts: the pump itself (submersible or pedestal), a sump pit or basin, a float switch that turns the pump on when water rises, a discharge pipe that carries water outside, and a check valve that keeps discharged water from flowing back into the pit. Submersible pumps sit inside the pit and are quieter and more powerful, making them the most common choice for finished basements. Many homes also benefit from a battery-powered backup pump, so protection continues during a power outage — exactly when heavy storms are most likely to knock out electricity.
Signs You Need Sump Pump Services
- Water in the basement or crawl space after rain — the clearest sign your pump is failing or you need one installed.
- The pump runs constantly or will not turn on, often caused by a stuck float switch, a worn motor, or a clogged intake.
- Strange noises such as grinding, rattling, or gurgling, which often mean a jammed impeller or a failing motor.
- Visible rust or corrosion on the pump or pit, which can signal age and impending failure.
- The pump is 7–10 years old — most sump pumps last about that long, so replacement is a smart preventive step.
Our Process
On-Site Assessment
The plumber inspects your sump pit, checks the pump and float switch, tests the discharge line, and evaluates your basement's water risk.
Upfront Quote
You get a clear price for the repair, replacement, or installation before any work begins.
Installation or Repair
The plumber installs the new pump, replaces worn parts, clears the discharge line, or wires in a battery backup and alarm system.
Testing
The system is tested by filling the pit and confirming the pump cycles on and off correctly and the check valve holds.
What Affects the Cost
- Sump pump replacement typically runs $400–$900 including parts and labor for a standard residential pump.
- A new installation with a pit and discharge line usually costs $1,000–$2,500, depending on whether a pit must be dug and how far the discharge line must run.
- Battery backup systems generally add $250–$500 to the job.
- Pump horsepower, submersible vs. pedestal design, discharge line length and route, and local permit requirements all affect the final price.
- Costs vary by location and job; your plumber provides an exact quote after an on-site diagnosis. Emergency or after-hours service typically carries a surcharge of $50–$150 or 1.5–2x the standard rate.
✓ Safe to DIY
- Test your pump every 2–3 months by pouring a bucket of water into the pit and confirming it turns on and pumps out.
- Clean the pit once a year to remove silt and debris that can jam the float switch.
- Check the discharge line for clogs or freezing in winter, especially in cold climates.
- Confirm the pump is plugged into a working GFCI-protected outlet.
✕ Stop & Call Us
- Never work on the pump or its wiring while standing in water — shut off power at the breaker first.
- Do not remove or bypass the check valve; without it, discharged water flows straight back into the pit.
- Do not attempt electrical wiring for a battery backup system yourself — have a licensed pro wire it in.
Frequently Asked Questions
How long does a sump pump last?
Most sump pumps last 7–10 years. If yours is near the end of that range or runs constantly, have a local plumber inspect it and consider a proactive replacement.
Do I need a battery backup for my sump pump?
If your area experiences power outages during storms — and most do — yes. A battery backup keeps the pump running when the power is out, which is exactly when you need it most.
Can a sump pump be installed in a home that doesn't have one?
Yes. A plumber can install a sump pit, pump, and discharge line in most basements or crawl spaces. The job usually takes a day and may require a local permit.
Why does my sump pump run all the time?
Common causes include a stuck float switch, a check valve that has failed (so water flows back into the pit), a discharge line that is too short, or a high water table. A local plumber can diagnose the cause quickly.
Related Services
Request Service
Step 1 of 3- Upfront pricing — no surprise charges
- Licensed, background-checked plumbers
- Cleanup included on every job
Need a Trusted Plumber Fast?
From 24/7 emergency repairs and drain clearing to water heater replacements and leak detection, licensed plumbers across the USA are standing by.

