Water Hammer: Why Your Pipes Bang & How to Stop It
Water hammer is the loud bang you hear when fast-moving water suddenly stops — usually when a tap, dishwasher, or washing machine valve shuts off quickly. The shockwave travels back through the pipes and can loosen joints, crack fittings, and eventually cause leaks. The most common fixes are draining the plumbing system to restore air chambers, installing water hammer arrestors near quick-closing valves, and lowering water pressure if it is above 80 psi.
What Is Water Hammer?
Water hammer is a pressure shockwave caused by water suddenly stopping or changing direction inside a pipe. Water is heavy and nearly incompressible, so when a valve closes in a fraction of a second, the moving water slams to a halt and its energy has nowhere to go. The result is a loud bang or series of thuds that you can hear — and sometimes feel — through the walls. It is most noticeable at washing machines, dishwashers, and single-lever faucets, because their valves close almost instantly, but it can happen at any fixture. The shockwave can briefly spike pressure to several times the normal level, which is why even a noise that seems harmless deserves attention.
Why It Happens
Several conditions cause or worsen water hammer, and most homes have more than one.
- Fast-closing valves: solenoid valves in dishwashers and washing machines shut in milliseconds.
- High water pressure: pressure above 60–80 psi makes the shockwave stronger.
- Waterlogged air chambers: older homes have vertical pipe stubs that trap air to cushion the shock — when the air dissolves into the water, the cushion is gone.
- Loose pipes: pipes that are not strapped securely rattle and amplify the noise.
- Long straight pipe runs: more water in motion means a bigger shockwave when it stops.
Is Water Hammer Dangerous?
Yes, over time. A single bang is mostly annoying, but repeated shockwaves stress every joint, fitting, and connection in your plumbing. The vibration loosens soldered and threaded joints, cracks pipe fittings, damages appliance valves, and can eventually cause a leak inside a wall. Water hammer can also damage the pressure relief valve on your water heater and shorten the life of washing machine and dishwasher inlet valves. If you hear banging regularly, it is worth fixing before it turns into a repair bill.
Quick Fix: Drain Your Pipes to Restore Air Chambers
In homes built before the 1990s, the first thing to try is recharging the air chambers. Shut off the main water supply, then open the highest faucet in the house and the lowest faucet (usually an outdoor hose bib or basement sink) and let all the water drain out. This lets air back into the chambers. Then close the faucets and turn the water back on slowly. If the banging stops, the chambers were waterlogged. This fix is free and takes about 30 minutes, though you may need to repeat it every few months if the chambers keep losing air.
Install Water Hammer Arrestors
A water hammer arrestor is a small sealed device with a piston and an air cushion that absorbs the shockwave. It screws onto the water supply line right before a quick-closing valve — typically at the washing machine, dishwasher, or ice maker. Screw-on arrestors cost $15–$40 each and can be installed by a confident DIYer at a washing machine hookup; arrestors for dishwashers and other built-in appliances usually need a plumber. For whole-house protection, a plumber can install arrestors at the main line and at each problem fixture. This is the most reliable long-term fix.
Check and Lower Water Pressure
High water pressure makes water hammer louder and more damaging. Buy a $10 pressure gauge, screw it onto an outdoor hose bib, and check your pressure: the ideal range is 40–60 psi, and anything above 80 psi is too high by code in most areas. If your pressure is high, a plumber can install or adjust a pressure-reducing valve (PRV) on your main water line — typically $300–$600 installed. Lowering the pressure not only stops the banging, it also extends the life of every fixture and appliance in your home.
Secure Loose Pipes
Sometimes what sounds like water hammer is partly loose pipes rattling in the walls. If the noise is a rattle rather than a single sharp bang, or if it happens when water is running rather than stopping, the pipes may need strapping. A plumber can add pipe clamps and insulation in accessible areas like the basement or crawl space — foam pipe insulation also dampens the sound and protects against freezing. In finished walls, the fix is more invasive, so it is usually combined with arrestors rather than done alone. Either way, do not ignore rattling pipes: constant movement wears through pipe walls at contact points over the years.
When to Call a Plumber
Call a licensed plumber if draining the system does not help, if the banging is getting louder or more frequent, if you see any sign of a leak, or if your water pressure is above 80 psi. A plumber can test your pressure, locate the source of the shockwave, and install arrestors or a pressure-reducing valve correctly. This is a small job for a professional — usually 1–2 hours — and it protects your plumbing from damage that costs far more to repair.
When to Call a Professional
Call a plumber if draining the system does not stop the banging, if the noise is getting louder, if your water pressure tests above 80 psi, or if you notice any damp spots or water stains near pipes.
What a Plumber Will Do
A plumber tests water pressure, locates the shockwave source, installs water hammer arrestors at quick-closing valves, adjusts or replaces the pressure-reducing valve, and secures any loose pipe runs.
Frequently Asked Questions
What is the difference between water hammer and noisy pipes?
Water hammer is a sharp bang when water stops suddenly. Other pipe noises have different causes: a whistling sound usually means a worn washer or partially closed valve, and a rattling sound while water runs usually means loose pipes. A plumber can diagnose the exact cause quickly.
Will water hammer go away on its own?
No. It may come and go as air chambers fill and empty, but the underlying cause — fast-closing valves, high pressure, or missing arrestors — does not fix itself, and the repeated shockwaves cause cumulative damage.
Do I need a water hammer arrestor on every faucet?
No. Arrestors are needed only at quick-closing valves: washing machines, dishwashers, ice makers, and some single-lever faucets. Standard faucets close slowly enough that they rarely cause water hammer.
How much does it cost to fix water hammer?
Draining the system to recharge air chambers is free. Screw-on arrestors cost $15–$40 each, and professional installation of arrestors or a pressure-reducing valve typically runs $200–$600 depending on how many fixtures need protection.
Can water hammer break a pipe?
Yes, over time. Repeated shockwaves loosen joints and crack fittings, and a severe hammer event can split a weak pipe outright. Fixing it early is far cheaper than repairing a burst pipe inside a wall.
