How Much Does Repiping a House Cost? A Complete USA Pricing Guide
Whole-home repiping costs $4,000–$15,000 in the United States, with most homeowners paying around $7,000–$10,000. PEX repiping is typically 30–50% cheaper than copper. All figures are national estimates — costs vary by location and job.
Average Repiping Cost
Whole-home repiping typically costs $4,000–$15,000, depending on the size of your home, the number of fixtures, the pipe material, and how accessible the pipes are. A small home with one bathroom may cost $4,000–$6,000, while a large two-story home with three or more bathrooms can cost $10,000–$15,000 or more. Another way plumbers estimate the job is $600–$1,000 per fixture, or roughly $2–$4 per linear foot of pipe installed, plus labor.
Cost by Home Size
Home size and bathroom count are the biggest drivers of repiping cost. These are national averages — costs vary by location and job.
- 1-bathroom home / condo: $4,000–$6,000
- 2-bathroom home (~1,500 sq ft): $5,000–$9,000
- 3-bathroom home (~2,000 sq ft): $7,000–$12,000
- 4+ bathroom home (2,500+ sq ft): $10,000–$15,000+
PEX vs. Copper: Material Costs
The pipe material you choose is one of the biggest cost drivers. PEX (cross-linked polyethylene) is the most popular choice for repiping today — flexible, freeze-resistant, quick to install, and resistant to corrosion and scale, at roughly $0.50–$2 per foot. Copper is the traditional premium option at roughly $2–$4 per foot, lasting 50+ years and handling high temperatures, but installation takes longer because joints must be soldered. CPVC is a budget option at about $0.50–$1 per foot, but it is brittle and less commonly recommended for whole-home repiping. Most plumbers today recommend PEX unless you have a specific reason to choose copper.
What Affects the Price
Several factors beyond home size shape the final quote.
- Number of fixtures and bathrooms — more fixtures mean more pipe, more fittings, and more labor.
- Accessibility — pipes in an open basement or crawl space are cheap to reach; pipes inside walls or under a concrete slab cost far more.
- Wall repair — repiping requires cutting access holes in drywall. Some quotes include patching and repainting; others do not. Drywall repair can add $500–$2,000.
- Permits and inspection — most cities require a permit for repiping, typically $100–$500.
- Fixture upgrades — many homeowners replace old valves, faucets, and supply lines during a repipe.
- Water shutoff time — a typical repipe takes 2–5 days, with water shut off during work hours.
Signs Your Home Needs Repiping
Repiping is a big investment, so make sure you need it. Strong signs include frequent leaks (two or more in a year), chronically low water pressure throughout the house, rusty or brown water, visible corrosion on exposed pipes, and pipes made of galvanized steel (common in homes built before 1960) or polybutylene (used 1978–1995, prone to sudden failure). Homes with galvanized steel pipes over 50 years old are the most common repipe candidates.
Repiping vs. Spot Repairs
A single leak can usually be fixed with a spot repair for $150–$600. But if you are repairing leaks every few months, the math flips: three or four spot repairs a year can cost more than a repipe within a few years — and each leak risks water damage. As a rule of thumb, if your pipes are over 50 years old and you have had two or more leaks in a year, get a repipe quote and compare it against the cost of continuing repairs.
How to Choose a Repiping Plumber
Repiping is major work, so choose the plumber as carefully as the material.
- Get 2–3 written quotes with the same scope: material, fixture count, permit, drywall repair, and cleanup.
- Ask about the warranty — reputable repiping companies offer 10–25 year warranties on workmanship.
- Confirm licensing and insurance — verify the plumber is licensed in your state and carries liability insurance.
- Ask how they protect your home — dust barriers, floor protection, and daily cleanup should be standard.
- Get the timeline in writing, including when water will be off each day.
When to Call a Plumber
Call a licensed plumber for an assessment if your home has galvanized steel or polybutylene pipes, if you have had repeated leaks, or if your water pressure has dropped throughout the house. Repiping is never a DIY job — it involves your main water supply, permits, inspections, and work inside walls. If you have an active leak, shut off the water at the main valve and call for emergency service.
Frequently Asked Questions
How much does it cost to repipe a house?
Whole-home repiping costs $4,000–$15,000 in the USA, with most homes paying $7,000–$10,000. PEX repiping is cheaper than copper. Costs vary by location and job.
How long does repiping take?
Most homes take 2–5 days. Water is shut off during work hours but is usually restored each evening.
Is PEX or copper better for repiping?
PEX is cheaper, faster to install, and freeze-resistant. Copper lasts longer and handles heat better. Most plumbers recommend PEX for repiping unless you specifically want copper.
Does repiping increase home value?
Yes — new plumbing is a strong selling point, especially in older homes. Buyers and home inspectors view new PEX or copper pipes as a major plus.
