Trusted Plumbing Services Nationwide • Licensed & Insured Plumbers Across the USA

fixtures

Bathtub Repair, Refinishing & Drain Fixes

Bathtub repair covers the tub itself and the plumbing connected to it — chips, cracks, and worn enamel on the surface, plus the drain, overflow, stopper, and faucet. Most problems can be repaired or refinished without the cost and mess of tearing out the tub.

A bathtub takes more abuse than almost any fixture in the home — hot water, heavy use, dropped bottles, and years of cleaning chemicals. Chips, cracks, stains, slow drains, and leaks around the faucet or overflow are all common, and most of them can be repaired without the cost and mess of tearing out the tub.

Surface repairs fix chips, cracks, scratches, and worn enamel — small damage can be patched and color-matched, while a badly worn tub can be refinished (reglazed) with a new coating that restores a smooth, glossy surface at a fraction of replacement cost. Plumbing repairs cover the tub drain and overflow assembly, the trip lever or pop-up stopper, the faucet and diverter, and leaks at the supply connections or around the drain. A slow-draining tub is usually caused by hair and soap buildup in the drain or a failing stopper mechanism, while water on the floor after a bath often points to a leaking overflow gasket or a failed caulk seal.

Signs You Need Bathtub Repair

  • Chips, cracks, or rust spots in the tub surface — damage spreads if left alone and can lead to leaks through the tub body.
  • A tub that drains slowly or won't drain, usually caused by hair, soap scum, or a faulty stopper mechanism.
  • Water leaking onto the floor around the tub — a failed overflow gasket, drain seal, or caulk line lets bathwater escape.
  • The stopper won't hold water — or won't release it — because of a worn trip lever, linkage, or pop-up assembly.
  • A dripping tub faucet, caused by a worn cartridge or washer, wasting water and staining the tub.

Our Process

1

Assessment

The plumber inspects the tub surface, tests the drain and stopper, checks the overflow and faucet, and looks for hidden leaks.

2

Upfront Quote

You get a clear price for the repair — drain fix, faucet repair, chip repair, or refinishing — before work begins.

3

Repair

The plumber clears or replaces the drain assembly, fixes the faucet or stopper, seals leaks, or patches and refinishes the surface.

4

Testing

The tub is filled and drained to confirm the repair holds, the stopper works, and nothing leaks.

What Affects the Cost

  • Clearing a slow tub drain typically runs $150–$400.
  • Replacing a tub drain, overflow, or stopper assembly usually costs $250–$600.
  • Chip and crack repairs generally run $150–$400, while full tub refinishing (reglazing) typically costs $400–$900 — far less than a full tub replacement, which can run $1,500–$5,000 with surround and plumbing work.
  • Tub material (porcelain, fiberglass, acrylic, or cast iron), the extent of the damage, whether access panels exist, and whether tile or surround work is needed all affect the final price.
  • Costs vary by location and job; your plumber provides an exact quote after an on-site diagnosis. Emergency or after-hours service typically carries a surcharge of $50–$150 or 1.5–2x the standard rate.

✓ Safe to DIY

  • Use a hair catcher over the drain to stop the most common cause of slow tub drains.
  • Clean the stopper and drain monthly to remove hair and soap buildup before it clogs.
  • Re-caulk around the tub as soon as you see gaps or mold in the sealant.
  • Use gentle, non-abrasive cleaners on the tub surface to protect the enamel and finish.

✕ Stop & Call Us

  • Do not use abrasive cleaners or harsh chemicals on the tub surface — they wear down enamel and finishes.
  • Do not attempt DIY refinishing with spray kits — a professional refinishing job lasts far longer and the chemicals require proper ventilation and protective equipment.
  • Do not ignore water on the floor after a bath; a leaking overflow gasket or drain seal can rot the subfloor if left alone.

Frequently Asked Questions

Can a chipped or cracked bathtub be repaired, or does it need replacing?

Most chips and small cracks can be patched and color-matched. Larger damage or a badly worn surface can be refinished. Replacement is usually only needed when the tub body is structurally failing or the surrounding floor is rotted.

How long does bathtub refinishing last?

A professional refinishing job typically lasts 5–10 years with proper care — gentle cleaners, no abrasives, and no bath mats with suction cups, which can lift the coating.

Why does my bathtub drain slowly even after I clear the hair?

The blockage may be deeper in the drain line, the stopper mechanism may be stuck partially closed, or soap scum may have built up in the trap. A plumber can diagnose it quickly.

Why is there water on the floor after I take a bath?

Common causes are a leaking overflow gasket, a failed drain seal, cracked caulk around the tub, or a loose faucet connection. All are repairable without replacing the tub.

Request Service

Step 1 of 3

Is water actively leaking right now?

  • Upfront pricing — no surprise charges
  • Licensed, background-checked plumbers
  • Cleanup included on every job

Need a Trusted Plumber Fast?

From 24/7 emergency repairs and drain clearing to water heater replacements and leak detection, licensed plumbers across the USA are standing by.