Trusted Plumbing Services Nationwide • Licensed & Insured Plumbers Across the USA

sewer

Main Sewer Line Cleaning & Maintenance

Sewer cleaning is the professional clearing of the main sewer line — the large pipe, usually 4 inches or wider, that runs from your home to the street sewer or septic tank. Plumbers clean it with a heavy-duty drain snake or with hydro jetting, and it is the simplest way to prevent a sewage backup.

Your main sewer line carries every drop of wastewater from your home to the city sewer or septic system. When it narrows with grease, scale, and root intrusion, wastewater has nowhere to go — and it comes back into your home through the lowest drain. Regular sewer cleaning keeps that main line open and is the simplest way to prevent a sewage backup.

Sewer cleaning targets the shared main line that every fixture depends on — this is different from drain cleaning, which clears the smaller fixture drains inside your home, such as a single sink or shower drain. Plumbers clean sewer lines with a heavy-duty drain snake or auger that cuts through roots and buildup, or with hydro jetting — high-pressure water that scours grease, scale, and debris off the pipe walls. A camera inspection is often done before or after cleaning to confirm the line is clear and to check for damage. Sewer cleaning is maintenance: it removes buildup from a sound pipe. If the camera finds cracks or collapses, that is a repair job, not a cleaning.

Signs You Need Sewer Cleaning

  • Multiple drains backing up at once — when the toilet, tub, and sink all drain slowly together, the problem is in the main line.
  • Sewage backing up into a tub or floor drain — the lowest drain in the home is where a blocked main line shows up first.
  • Gurgling toilets when you run water elsewhere, caused by air trapped by a narrowing main line.
  • Foul sewage odor from drains or the yard — standing wastewater in a partially blocked line smells.
  • It's been years since your last cleaning — homes with older lines or heavy use benefit from cleaning every 1–2 years.

Our Process

1

Assessment and Camera Inspection

The plumber locates the sewer cleanout and may run a camera to see what is blocking the line.

2

Upfront Quote

You get a clear price for snaking or hydro jetting before work begins.

3

Cleaning

The plumber snakes the line to cut through roots and blockages, or hydro jets it to scour the pipe walls clean.

4

Verification

The line is flushed and, where needed, camera-checked again to confirm it is fully open.

What Affects the Cost

  • A standard main sewer line snaking typically runs $200–$600.
  • Hydro jetting a sewer line usually costs $400–$1,000, depending on the line's length and how severe the buildup is.
  • A camera inspection, if done separately, generally adds $100–$350.
  • Line length and depth, whether a cleanout is accessible, the severity of root intrusion or grease buildup, and local rates all affect the final price.
  • Costs vary by location and job; your plumber provides an exact quote after an on-site diagnosis. Emergency or after-hours service typically carries a surcharge of $50–$150 or 1.5–2x the standard rate.

✓ Safe to DIY

  • Never pour grease down the drain — it hardens in the main line and is the leading cause of sewer blockages.
  • Only flush toilet paper — wipes, even "flushable" ones, do not break down and snag in the main line.
  • Plant trees at least 10 feet from your sewer line; roots are the most destructive force on older sewer pipes.
  • Know where your sewer cleanout is so the plumber can access the line quickly in an emergency.

✕ Stop & Call Us

  • Do not try to clean a major sewage backup yourself — sewage is a health hazard. Stop using water and call for emergency dispatch.
  • Do not pour chemical drain cleaners into a backed-up main line — they won't clear a main-line blockage and create a hazard for anyone who works on the pipe.
  • Do not ignore repeat backups; a line that keeps blocking may be damaged, not just dirty, and needs a camera inspection.

Frequently Asked Questions

How is sewer cleaning different from drain cleaning?

Drain cleaning clears the smaller pipes serving individual fixtures — a sink, a shower, a toilet. Sewer cleaning clears the main line that all of those fixtures drain into. If several fixtures back up at once, you need sewer cleaning, not drain cleaning.

How often should a main sewer line be cleaned?

Most homes benefit from cleaning every 1–2 years. Homes with large trees near the line, older clay or cast-iron pipe, or heavy use may need it annually.

Is hydro jetting safe for old sewer pipes?

Hydro jetting is safe for most sound pipes, but a camera inspection should come first on old or fragile lines. If the pipe is cracked or collapsed, jetting won't help — repair is needed instead.

Will sewer cleaning get rid of tree roots?

Snaking cuts roots out of the line and hydro jetting flushes them away, but roots grow back. For lasting control, ask your plumber about root treatments or repairing the joints where roots enter.

Request Service

Step 1 of 3

Is water actively leaking right now?

  • Upfront pricing — no surprise charges
  • Licensed, background-checked plumbers
  • Cleanup included on every job

Need a Trusted Plumber Fast?

From 24/7 emergency repairs and drain clearing to water heater replacements and leak detection, licensed plumbers across the USA are standing by.